MAGSTAMPER MAGNETIC STAMP HOLDER SET

MAGSTAMPER MAGNETIC STAMP HOLDER SET

MAGSTAMPER MAGNETIC STAMP HOLDER 3 PIECE SET

1 MAGNETIC STAMP HOLDER. 2 SLEEVES WITH 4 SIZES, 2 SIZES PER SLEEVE

The Magstamper Magnetic Stamp Holder is a no impact tool for a stamping process. This metal tool is designed to keep workers’ hands away from the impact area when marking on projects.

The Magstamper is securely held in place by a magnet at the base of the holder.

Stamp Sleeves are securely held in place by a hex head set screw.

Stamps are securely held in place by a hex head set screw.

The Stamp Sleeves in this set have 4 sizes. 2 sizes per sleeve. Sleeve 1; 5/16” and 1/2”

Sleeve 2; 1/4” and 3/8”.  Sleeves will accommodate round, square, rectangle stamps or chisels.  

We advise keeping stamp lengths at or under 3”.

ADDITIONAL STAMP HOLDER SLEEVES (sold separately).   

The blots are loosened and tightened by hand turning the bolt on the base of the holder. “Bolts should be tight but not overtightened” If overtightened use a 7/16” wrench to loosen. (It is common for the bolts to tighten when in use.)

WEAR SAFETY GLASSES AT ALL TIMES.

Tools are made to order; most orders ship within 2-1/2 weeks. BUT mishaps happen so please allow up to 4 weeks for fabrication before panic sets in.